A fully-fledged Dart package repository, the package manager for Dart and Flutter! Cloudsmith is fully compatible as a pub-like repository.

The following instructions are for Dart or compatible packages only.

Packages from this repository can only be installed using Dart SDK version 2.15 or later.

If you couldn't find what you needed in our documentation, then you can always chat to a member of our team instead. It's our mission to be your dedicated off-site team for package management, and we mean it. Come and chat with us, anytime.

A repository that supports Maven-compatible projects and JARs, with support for Gradle, SBT, Leiningen, Ivy, Grape, etc.

The following instructions are for Maven or compatible packages only.

• Maven
• Gradle
• Sbt/Scala
• Leiningen/Clojure
• Grape

<repositories>
  <repository>
    <id>cometchat-cometchat</id>
    <url>https://dl.cloudsmith.io/public/cometchat/cometchat/maven/</url>
    <releases>
      <enabled>true</enabled>
      <updatePolicy>always</updatePolicy>
    </releases>
    <snapshots>
      <enabled>true</enabled>
      <updatePolicy>always</updatePolicy>
    </snapshots>
  </repository>
</repositories>

<dependency>
  <groupId>group-id</groupId>
  <artifactId>artifact-id</artifactId>
  <version>version</version>
</dependency>

repositories {
  maven {
    url "https://dl.cloudsmith.io/public/cometchat/cometchat/maven/"

  }
}

dependencies {
  implementation 'group-id:artifact-id:version'
}

resolvers += "cometchat-cometchat" at "https://dl.cloudsmith.io/public/cometchat/cometchat/maven/"

libraryDependencies += "group-id" % "artifact-id" % "version"

addMavenResolverPlugin

:repositories [["snapshots" "https://dl.cloudsmith.io/public/cometchat/cometchat/maven/"]
               ["releases" "https://dl.cloudsmith.io/public/cometchat/cometchat/maven/"]]

:dependencies [[group-id/artifact-id "version"]]

@GrabResolver(name='cometchat-cometchat', root='https://dl.cloudsmith.io/public/cometchat/cometchat/maven/')

@Grab(group='group-id', module='artifact-id', version='version')

If you couldn't find what you needed in our documentation, then you can always chat to a member of our team instead. It's our mission to be your dedicated off-site team for package management, and we mean it. Come and chat with us, anytime.

Npm is the package manager of choice for the Javascript/Node ecosystem. Cloudsmith is fully compatible as an npmjs-like registry.

The following instructions are for npm or compatible packages only.

There are two ways to tell npm to use a Cloudsmith-based npm registry:

1. Set the registry as the default globally, per-user or per-project.
2. Provide the registry URL when executing npm commands.

To use/set the registry as the default for your user, execute the following:

npm config set registry https://npm.cloudsmith.io/cometchat/cometchat/

You can set it globally (with permissions) by using the -g argument.

Alternatively, you can add it directly to your user or project .npmrc file:

registry=https://npm.cloudsmith.io/cometchat/cometchat/

Note: Setting the registry globally will impact all npm commands, unless they explicitly override the registry.

You can specify the registry each time you execute npm commands, such as:

npm install lodash --registry=https://npm.cloudsmith.io/cometchat/cometchat/

For a public registry, you do not provide authentication for read-only contexts, such as installing packages:

npm install awesome-package

You can namespace your registry and packages using npm scopes.

Using a registry scope tells npm to route installs for packages in that scope to Cloudsmith.

You can set it via the command-line using:

npm config set '@cloudsmith:registry' https://npm.cloudsmith.io/cometchat/cometchat/

You can also set it directly in your user or project .npmrc file:

@cloudsmith:registry=https://npm.cloudsmith.io/cometchat/cometchat/

Note: You should replace @cloudsmith in the above with your own scope name.

Using a package scope provides a different namespace to other similarly named packages to differentiate them.

Installing packages with a scope requires putting the scope before the name:

npm install @cloudsmith/awesome-package

You can find out more about scoped packages (on npmjs.com).

Note: You should replace @cloudsmith in the above with your own scope name.

Distribution tags allow npm packages to be tagged with a mnemonic that is associated with a specific package version.

These can be used as an alternative to the package version when installing packages, such as:

npm install awesome-package@beta --registry=https://npm.cloudsmith.io/cometchat/cometchat/

Cloudsmith has full support for distribution tags and (mostly) follows the same rules for them as on npmjs.com:

1. A specific tag can point at one version of a package only.
2. A package version may have multiple unique tags.
3. Unless specified otherwise, the default tag for the last package published is latest.
4. When a package that is latest is deleted, the tag is moved to the next applicable version by semver.

Note: If the repository is configured so that upstream npm tags take precedence, tags from configured upstreams will override matching local tags. When both upstream and local repositories have the same tag name (e.g., latest), the upstream tag will be used instead of the local one, even if the local repository has a semantically higher version.

You can inspect a package to see what tags it has:

npm dist-tags ls awesome-package --registry=https://npm.cloudsmith.io/cometchat/cometchat/
(out)latest: 1.0.0
(out)beta: 2.0.0

You can find out more about distribution tags (on npmjs.com).

Cloudsmith supports transparent proxying of install requests to/from npmjs.com.

When enabled, requests for packages that don't exist in the registry will be automatically proxied:

npm install lodash@4.17.11 --registry='https://npm.cloudsmith.io/cometchat/cometchat/'
(out)+ lodash@4.17.11
(out)updated 1 package in 2.743s

In this case, lodash didn't exist in the registry and was proxied. This also applies automatically when npm is installing dependencies for your package. It will load them from the registry automatically and transparently proxy them.

Warning: If transparent upstream proxying is disabled for the registry then you will need to fetch all dependencies of your packages manually. These can then be published into the registry, or you can bundle them with bundleDependencies.

Cloudsmith supports proxying of npm audit requests to detect vulnerabilities in dependencies:

npm audit
(out)                       === npm audit security report ===
(out)found 0 vulnerabilities
(out) in 1 scanned package

You can find out more about security auditing (on npmjs.com).

Assuming that you have always-auth enabled, Yarn is immediately compatible with Cloudsmith registries:

yarn add lodash@4.17.11 --registry=https://npm.cloudsmith.io/cometchat/cometchat/
(out)[1/5] Validating package.json...
(out)[2/5] Resolving packages...
(out)[3/5] Fetching packages...
(out)[4/5] Linking dependencies...
(out)[5/5] Building fresh packages...
(out)success Saved lockfile.
(out)success Saved 1 new dependency.
(out)info Direct dependencies
(out)└ lodash@4.17.11
(out)info All dependencies
(out)└ lodash@4.17.11

To enable always-auth, add it to your user or project .npmrc file:

always-auth

If you couldn't find what you needed in our documentation, then you can always chat to a member of our team instead. It's our mission to be your dedicated off-site team for package management, and we mean it. Come and chat with us, anytime.

A repository that acts like a container for any type of files. Think DropBox, but with a pinch more awesome.

The following instructions are for Raw or compatible packages only.

The purpose of raw files depends on the content of the raw file, which Cloudsmith doesn't know, so we can't provide you with an automated setup method (yet), but it might be as simple as downloading the file.

You can download a raw file using the browser, or if you're running Linux you can use standard tools such as curl.

curl -1sLf -O 'https://dl.cloudsmith.io/public/cometchat/cometchat/raw/files/your-package.zip'

Note: You'll need to replace your-package.zip with your own equally fantastic file name.

If you couldn't find what you needed in our documentation, then you can always chat to a member of our team instead. It's our mission to be your dedicated off-site team for package management, and we mean it. Come and chat with us, anytime.